DANAK

Reg. No. 19 Akkreditering til prøvning og kalibrering

Side: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 all
Prøvningsområde Prøvetype/emne Yderligere Specifikation Parameter Metode Referencemetode Prøvningsprincip Bemærkning (da) Lokation
EMC Prøvning Telekommunikationsudstyr ETSI EN 301 489-1 V2.2.3:2019 ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements. Harmonised Standard for ElectroMagnetic Compatibility. Requirements of article 3.1(b) of Directive 2014/53/EU and article 6 of Directive 2014/30/EU Hørsholm & Aarhus
EMC Prøvning Maskiner og industrielle anlæg IEC 61000-4-6:2007 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields Hørsholm; Aarhus
EMC Prøvning Telekommunikationsudstyr ETSI EN 301 489-3 V1.4.1:2002 Electromagnetic compability and Radio spectrum Matters (ERM); Electromagnetic Compability (EMC) standard radio equipment; Part 3: Specific conditions for Short-Range Devices (SRD) Operating frequencies 9 kHz to 40 GHz Hørsholm
EMC Prøvning Telekommunikationsudstyr ETSI EN 301 489-3 V1.6.1:2013 Electromagnetic Compability and Radio spectrum Matters (ERM); Electromagnetic Compability (EMC) standard radio equipment; Part 3: Specific conditions for Short-Range Devices (SRD) Operating frequencies 9 kHz to 40 GHz Hørsholm & Aarhus
EMC Prøvning Telekommunikationsudstyr ETSI EN 301 489-3 V2.1.1:2019 ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU Hørsholm & Aarhus
EMC Prøvning Telekommunikationsudstyr ETSI EN 301 489-3 V2.3.2:2023 ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU Hørsholm & Aarhus
EMC Prøvning Maskiner og industrielle anlæg IEC 61000-4-6:2008 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields Hørsholm, Aarhus
EMC Prøvning Maskiner og industrielle anlæg EN 61000-4-6:2009 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields Hørsholm, Aarhus
EMC Prøvning Maskiner og industrielle anlæg EN 13309:2000 Construction machinery - Electromagnetic compatibility of machines with internal electrical power supply Aarhus
EMC Prøvning Maskiner og industrielle anlæg IEC 61000-4-6:2013 Ed 4. Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields Hørsholm, Aarhus
EMC Prøvning Maskiner og industrielle anlæg EN 61000-4-6:2014 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields Hørsholm, Aarhus
EMC Prøvning Telekommunikationsudstyr ETSI EN 301 489-17 V2.1.1:2009 Electromagnetic compability and Radio spectrum Matters (ERM); Electromagnetic Compability (EMC) standard radio equipment; Part 17: Specific conditions for2.4 GHz wideband transmission systems and 5 GHz high performance RLAN Hørsholm
EMC Prøvning Maskiner og industrielle anlæg EN 61000-4-8:1994 Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 8: Power frequency magnetic field immunity test - Basic EMC Publication Hørsholm; Aarhus
EMC Prøvning Telekommunikationsudstyr ETSI EN 301 489-17 V3.1.1:2017 ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for Broadband Data Transmission Systems Harmonized essential requirements of article 3.1(b) of Directive 2014/53/EU Hørsholm & Aarhus
EMC Prøvning Telekommunikationsudstyr ETSI EN 301 489-17 V2.2.1:2012 Electromagnetic compability and Radio spectrum Matters (ERM); Electromagnetic Compability (EMC) standard radio equipment; Part 17: Specific conditions for2.4 GHz wideband transmission systems and 5 GHz high performance RLAN EMC Hørsholm & Aarhus
EMC Prøvning Telekommunikationsudstyr ETSI EN 301 489-17 V3.2.2:2019 ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for Broadband Data Transmission Systems; Harmonised Standard for ElectroMagnetic Compatibility Harmonized essential requirements Hørsholm & Aarhus
EMC Prøvning Telekommunikationsudstyr ETSI EN 301 489-17 V3.2.4:2020 ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for Broadband Data Transmission Systems; Harmonised Standard for ElectroMagnetic Compatibility Harmonized essential requirements Hørsholm & Aarhus
EMC Prøvning Telekommunikationsudstyr ETSI EN 301 489-52 V1.2.1:2021 ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 52: Specific conditions for Cellular Communication User Equipment (UE) radio and ancillary equipment; Harmonised Standard for ElectroMagnetic Compatibility Harmonized essential requirements Hørsholm & Aarhus
EMC Prøvning Telekommunikationsudstyr ETSI EN 301 489-18 V1.3.1:2002 Electromagnetic compability and Radio spectrum Matters (ERM); Electromagnetic Compability (EMC) standard radio equipment; Part 18: Specific conditions for Terrestrial Trunked Radio (TETRA) equipment EMC Hørsholm
EMC Prøvning Telekommunikationsudstyr ETSI EN 301 489-7 V1.3.1:2005 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 7: Specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS) Hørsholm & Aarhus
EMC Prøvning Telekommunikationsudstyr ETSI EN 301 406 V2.1.1:2009 Digital Enhanced Cordless elecommunications (DECT); Harmonized EN for Digital Enhanced Cordless elecommunications (DECT) covering the essential requirements under article 3.2 of the R&TTE Directive; Generic radio EMC Aarhus
EMC Prøvning Telekommunikationsudstyr ETSI EN 301 406 V2.1.1:2009 Digital Enhanced Cordless elecommunications (DECT); Harmonized EN for Digital Enhanced Cordless elecommunications (DECT) covering the essential requirements under article 3.2 of the R&TTE Directive; Generic radio EMC Hørsholm
EMC Prøvning Telekommunikationsudstyr ETSI EN 301 908-1 v11.1.1:2016 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 1: Introduction and common requirements EMC Hørsholm & Aarhus
EMC Prøvning Telekommunikationsudstyr ETSI EN 301 908-1 v13.1.1:2019 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 1: Introduction and common requirements EMC Hørsholm & Aarhus
EMC Prøvning Telekommunikationsudstyr ETSI EN 301 908-1 v15.2.1:2023 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 1: Introduction and common requirements EMC Hørsholm & Aarhus
EMC Prøvning Telekommunikationsudstyr ETSI EN 301 489-19 V2.1.1 (2019-04) ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band providing data communications and GNSS receivers operating in the RNSS band (ROGNSS) providing positioning, navigation, and timing data; Product Standards, Satellite Communication Hørsholm & Aarhus
EMC Prøvning Maskiner og industrielle anlæg EN 61000-4-8/A1:2001 Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 8: Power frequency magnetic field immunity test - Basic EMC Publication Hørsholm; Aarhus
EMC Prøvning Maskiner og industrielle anlæg EN 61000-4-8:2010 Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 8: Power frequency magnetic field immunity test - Basic EMC Publication Hørsholm; Aarhus
EMC Prøvning Maskiner og industrielle anlæg IEC 61000-4-8:2009 Ed.2.0 Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 8: Power frequency magnetic field immunity test - Basic EMC Publication Hørsholm, Aarhus
EMC Prøvning Maskiner og industrielle anlæg IEC 61000-4-8:1994 Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 8: Power frequency magnetic field immunity test - Basic EMC Publication Hørsholm; Aarhus
EMC Prøvning Maskiner og industrielle anlæg EN 61000-4-9:1994 Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 9: Pulse magnetic field immunity test - Basic EMC Publication Hørsholm; Aarhus
EMC Prøvning Maskiner og industrielle anlæg EN 61000-4-9:2016 Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 9: Pulse magnetic field immunity test - Basic EMC Publication Hørsholm & Aarhus
EMC Prøvning Maskiner og industrielle anlæg IEC 61000-4-9:1993 Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 9: Pulse magnetic field immunity test - Basic EMC Publication Hørsholm; Aarhus
EMC Prøvning Maskiner og industrielle anlæg IEC 61000-4-9:2016 Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 9: Pulse magnetic field immunity test - Basic EMC Publication Hørsholm & Aarhus
EMC Prøvning Maskiner og industrielle anlæg EN 61000-4-9/A1:2001 Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 9: Pulse magnetic field immunity test - Basic EMC Publication Hørsholm; Aarhus
EMC Prøvning Maskiner og industrielle anlæg IEC 61000-4-9/A1:2000 Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 9: Pulse magnetic field immunity test - Basic EMC Publication Hørsholm; Aarhus
EMC Prøvning Maskiner og industrielle anlæg EN 61000-4-10:2017 Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 10: Damped oscillatory magnetic field immunity test - Basic EMC Publication Hørsholm; Aarhus
EMC Prøvning Maskiner og industrielle anlæg IEC 61000-4-10:2017 Ed2 Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 10: Damped oscillatory magnetic field immunity test - Basic EMC Publication Hørsholm; Aarhus
EMC Prøvning Maskiner og industrielle anlæg EN 61000-4-11:2004 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests Hørsholm; Aarhus
EMC Prøvning Maskiner og industrielle anlæg IEC 61000-4-11:2004 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests Hørsholm; Aarhus
EMC Prøvning Telekommunikationsudstyr IEC 61000-4-11:2004/A1:2017 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests Hørsholm & Aarhus
EMC Prøvning Andre produkter EN 61000-4-13:2009 Ed. 1.1 Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests EMC Hørsholm; Aarhus
EMC Prøvning Telekommunikationsudstyr EN IEC 61000-4-11:2020 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase Hørsholm & Aarhus
EMC Prøvning Telekommunikationsudstyr IEC 61000-4-11:2020 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase Hørsholm & Aarhus
EMC Prøvning Telekommunikationsudstyr EN IEC 61000-4-11:2020/AC:2020-06 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase Hørsholm & Aarhus
EMC Prøvning Telekommunikationsudstyr IEC 61000-4-11:2020/COR1:2020 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase Hørsholm & Aarhus
EMC Prøvning Telekommunikationsudstyr IEC 61000-4-11:2020/COR2:2022 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase Hørsholm & Aarhus
EMC Prøvning Telekommunikationsudstyr EN IEC 61000-4-11:2020/AC2:2022-10 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase Hørsholm & Aarhus
EMC Prøvning Andre produkter IEC 61000-4-13:2009 Ed. 1.1 Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests EMC Hørsholm; Aarhus
EMC Prøvning Andre produkter IEC 61000-4-13:2009 Am1 2009-05 Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests EMC Hørsholm; Aarhus